Maintenance Tips, Tricks And Hacks For Your Vehicle

P0402 Code In Citroen: Causes, Symptoms, and How To Fix

Author:

Published:

Updated:

P0402 Code in Citroen vehicles is one of the most common codes, typically indicating an issue with the exhaust gas recirculation (EGR) system.

This code can be caused by a variety of issues such as worn-out components or buildup of dirt and debris on the EGR valve or pipes.

Key Takeaway

  • The P0402 code in Citroen is a diagnostic trouble code (DTC) that indicates an excessive flow of exhaust gases has been detected in the engine’s intake tract, often due to issues with the Exhaust Gas Recirculation (EGR) system.
  • The P0402 code in Citroen is typically caused by issues such as a carbon-fouled or faulty EGR valve, lack of vacuum to the EGR valve, a failed differential pressure/temperature sensor, or an excessively open EGR valve leading to an excessive flow of exhaust gases detected by the engine’s intake tract.
  • The symptoms of a P0402 code in Citroen can include an illuminated check engine light, stalling, rough idling, performance issues, and drivability problems such as the engine surging off idle.

What Is P0402 Code In Citroen

P0402 Code In Citroen Causes, Symptoms, and How To Fix

The P0402 code in a Citroen indicates that the car’s computer system has detected an excessive flow of exhaust gases being recirculated into the engine’s intake tract, often due to a malfunctioning or jammed EGR valve.

This diagnosis can result in various symptoms such as the activation of the check engine light or drivability problems like engine surges off idle.

Causes of P0402 Code In Citroen

P0402 Code In Citroen Causes, Symptoms, and How To Fix
  • A faulty Exhaust Gas Recirculation (EGR) valve that is stuck open
  • EGR passages that are clogged or restricted
  • Problems with the EGR control solenoid or circuit
  • Issues with the Differential Pressure Feedback Electronic (DPFE) sensor or hoses
  • Vacuum leaks at the EGR valve or any of its associated components
  • Malfunctioning Mass Air Flow Sensor (MAF)
  • Problems with the Powertrain Control Module (PCM), although this is less common.

Symptoms of P0402 Code in Citroen

  • Activation of the check engine light
  • Poor engine performance, such as rough idling or stalling
  • Decreased fuel efficiency
  • Unusual smells from the exhaust
  • Difficulty starting the vehicle or maintaining consistent power
  • Potential for the vehicle to enter “limp mode” to prevent further damage
  • Engine surges off idle.

How To Fix P0402 Code in Citroen

Here is how to fix the P0402 code in Citroen:

Step 1: Scan the Vehicle

First, use an OBD-II scanner to confirm the P0402 code. Make a note of any other codes that are present, as these may be related to the issue.

Step 2: Inspect the EGR Valve

Check the Exhaust Gas Recirculation (EGR) valve for signs of damage or malfunction. If the valve is stuck open, it may need to be cleaned or replaced.

Step 3: Check the EGR Passages

Inspect the EGR passages for clogs or restrictions. These can sometimes be cleaned, but in severe cases, parts may need to be replaced.

Step 4: Inspect the EGR Control Solenoid and Circuit

Examine the EGR control solenoid and circuit for signs of damage or wear. Test the solenoid to ensure it is functioning properly.

Step 5: Check the DPFE Sensor and Hoses

Inspect the Differential Pressure Feedback Electronic (DPFE) sensor and its associated hoses. If these are damaged or malfunctioning, they will need to be replaced.

Step 6: Check for Vacuum Leaks

Inspect the EGR valve and its associated components for vacuum leaks. These can often be identified by a hissing sound or by using a smoke machine.

Step 7: Inspect the Mass Air Flow Sensor

Check the Mass Air Flow (MAF) sensor for signs of damage or malfunction. If necessary, clean or replace the sensor.

Step 8: Check the Powertrain Control Module

Finally, inspect the Powertrain Control Module (PCM). This is a less common cause of a P0402 code, but if all other potential issues have been ruled out, the PCM may need to be repaired or replaced.

FAQs

Q: How does the EGR system work in a Citroen?

A: The EGR system in a Citroen works by recirculating a small amount of exhaust gas back into the intake manifold. This helps lower combustion temperatures and reduce nitrogen oxide (NOx) emissions.

Q: How do I diagnose the P0402 code in my Citroen?

A: To diagnose the P0402 code in your Citroen, you can start by visually inspecting the EGR system for any signs of damage or leaks. You can also use a scan tool to retrieve the specific trouble code and freeze frame data to get more information about the issue.

Q: Can I drive my Citroen with a P0402 code?

A: It is generally not recommended to drive your Citroen with a P0402 as it can lead to reduced engine performance, increased emissions, and potential damage to other components of the EGR system.

Q: How much does it cost to fix the P0402 code in a Citroen?

A: The cost of fixing the P0402 code in a Citroen can vary depending on the specific cause of the issue and the labor rates in your area. It is best to consult with a qualified mechanic or Citroen dealership to get an accurate estimate.

Q: Can I fix the P0402 code in my Citroen myself?

A: If you have experience and knowledge about automotive repairs, you may be able to fix the P0402 in your Citroen yourself. However, it is recommended to consult with a professional if you are unsure about the diagnosis or repair process.

Q: How long does it take to fix the P0402 code in a Citroen?

A: The time it takes to fix the P0402 in a Citroen can vary depending on the specific cause of the issue and the availability of parts. In some cases, it can be fixed within a few hours, while in others, it may take longer.

Q: What happens if I ignore the P0402 code in my Citroen?

A: Ignoring the P0402 in your Citroen can lead to reduced engine performance, increased emissions, and potential damage to other components of the EGR system. It is best to address the issue as soon as possible to prevent further complications.

Q: Can a faulty EGR valve cause other problems in my Citroen?

A: Yes, a faulty EGR valve in your Citroen can cause other problems such as rough idle, engine misfires, decreased fuel efficiency, and even engine stalling. It is important to have it repaired or replaced to prevent further issues.

In Conclusion

The P0402 Code can be a difficult problem to diagnose and fix in any Citroen. It is important to follow the correct steps in order to determine the root cause of the code and properly resolve it.

Common causes include malfunctioning EGR valves, clogged catalytic converters, and bad O2 sensors.

Symptoms of this code may include reduced engine performance, a decrease in fuel efficiency, and strange noises coming from the engine.

MECHANIC APPROVED

✔️ REVIEWED & FACT-CHECKED BY

Vide Polowenski, Senior Mechanic

The information in this article is current and up-to-date in accordance with the latest mechanic SOPs.

Please take the time to leave a comment if this article has helped you in any way, you need additional help, or you have a suggestion.

Latest Posts

  • Crankshaft Position Sensor Lifespan

    Crankshaft Position Sensor Lifespan

    Crankshaft Position Sensor (CPS), is a pivotal component in your vehicle’s engine. Often referred to as the engine’s heartbeat monitor, the CPS plays a crucial role in ensuring optimal engine performance and efficiency. In this blog post, we delve into the intricacies of the Crankshaft Position Sensor’s lifespan, exploring the factors that influence its durability…

    Read more

  • Crankshaft Position Sensor Fuse Location

    Crankshaft Position Sensor Fuse Location

    This tiny component plays a significant role in the smooth operation of your vehicle’s engine, influencing everything from ignition timing to fuel efficiency. In this post, we delve into the often-overlooked but crucial aspect of vehicle maintenance and repair – locating and understanding the crankshaft position sensor fuse. The crankshaft position sensor fuse in cars…

    Read more

  • How to Replace Your Crankshaft Position Sensor

    How to Replace Your Crankshaft Position Sensor

    Replacing a crankshaft position sensor might seem like a daunting task, reserved only for seasoned mechanics, but with the right guidance, it can be an achievable challenge for even the most novice of car enthusiasts. This crucial component, often hidden within the intricate labyrinth of your engine, plays a pivotal role in the smooth operation…

    Read more